HBT15 Concrete Pump and Mixer mixing conveyer has agitation and the transportation functions. The agitation system adopts self-fall type bi-pyramid to reverse discharging mechanism; The hydraulic system uses double cylinder piston type, the electrical and hydraulic control, the S valve assignment form.Main parts:
1.The main engine is composed by the hydraulic system, the electric system, the pump system, the mixing mechanism, the distributing valve, the running gear, the cowling, the rack, the transfer pipeline and so on.
2.The hydraulic system is composed by the main oil route system, the distributing valve oil system, the mixing oil system.
3.Main main oil route system including oil filter, ram pump, Electromagnetism distributing valve, electromagnetism overflow valve, check valve, main oil cylinder as well as pipeline appendix.
4.The distributing valve oil system including oil filter, Electromagnetism distributing valve, oil cylinder as well as pipeline appendix and so on.
5.The electric system including the electromotor, AC contact device, air switch, push-button switch.Advantages
This equipment has the system to be stable, the control system is simple, the control is convenient, few maintenance, motion convenience and so onFeatures1. It may use to the high-rise construction or the remote transfer mortar, the foaming concretes as well as the small aggregate concretes, facilitates the construction work. It has the transportation, the efficiency high, to disturb slightly mutually continuously with other equipment, it may transport the mortar to the other equipment out of reach place. Mortar flows in the pipeline, it will not cause merits environmental pollution and so on.
2. It through increased the compressed air injection gear to constitute a complete wet concretes jet aircraft, it might use in the mine pit and the understructure work supports and protections lining work. The construction wall surface spray coating, the construction structure reinforcement, the ground side slope stability, projects tunnel excavation and so on. It has the work efficiency to be high, the concretes quality is good, the dust loading is low, the snapping back rate is low, the failure rate is low, and the building cost of projects is low
|Max. Actual Output||m3/h||15|
|Distribution Valve Type||S Tube Valve|
|Concrete Clinder Size||mm||φ160×1000|
|Main Oil Cylinder||mm||φ110/1000|
|Oil Tank Capacity||L||200|
|Inner Dia.of Delivery Pipe||mm||φ125|
|Max. Dia of Aggregates||mm||40|
|Towing Speed||km/h||≤ 8|
|Mixer Model ||RDCM350|
|Loading Hopper ||Mechanical Hoist Hopper |