TDCM510-11D
Tilting Drum Concrete Mixer
During mixing, it is very important to tilt the drum. And the raw material feeding process is suggested as follows:
Put in the water and sand first to clean off the remains of the last mix. Add the cement and turn the drum about 4 turns. The water/sand/cement mixture should be smooth and flowing evenly. Turn the drum until the color of the mix is even.
Put in the stone and turn the drum about 8 turns. Don't go too fast, let the mix fall through the mixing arms. Going fast does not make a better mix. The drum axis usually stays at an angle of about 15 degrees from horizontal during mixing.
Advantages
1.A low cost, mechanically fed, Manual tilting drum mixer
2.High capacity mixer capable of producing up to 32 batches (6 cubic metres) per hour
3.Materials loaded using a mechanical loading hopper to ensure high production rates
4.Choice of all kinds of diesel engine or 3-phase electric motor
5.Positive heavy duty driveline using roller chain bevel wheel and pinion
6.Jacking system allows wheel removal for storage during long term use
7.Outrigger legs maintain stability throughout the loading cycle
Main Specifications
| |
TDCM510 |
| Power |
7KW/13KW |
| Power source |
Diesel Or Electrol Motor |
| Drum total Volume |
660 liter |
| Capacity (unmixed) |
320 litre |
| Capacity (mixed) |
200 litre |
| Mixing time |
40 sec. |
| Capacity Per Hour |
6~8m3 |
| Dimension |
1930×2300×2950mm |
| Steel Thickness of Drum |
4mm |
| Operation |
Maunally Fed |
| Weight |
1250kg/1300kg |
Shipping, Delivery & Maintenance
| 20' container can be loaded with |
4 units |
| 40H' container can be loaded with |
9 units |
| Delivery time |
4 weeks after confirmation of the order |
Audited Supplier 
){kind=link}
){kind=link}